Regular cleaning and draining your hot tub with Australian spa parts is one of the most effective ways to ensure that it always has clean, clear, and easy-to-maintain pool water. Regrettably, many of those who own this type of pool equipment stick to an inadequate cleaning regimen. If you want to maintain your hot tub properly and keep it in good shape all year round, we suggest that you consider the tips and pointers we compiled below.
Proper Draining and Refilling of Hot Tub
- The simplest and most effective way of washing your hot tub is to drain its water first, clean its surfaces, and then fill it again with clean and fresh water.
- It makes it easy to add fresh water, which enhances the water’s feel and offers a more pleasant bathing experience. It creates an opportunity to wash the outer shell of your hot tub.
Draining and Cleaning the Hot Tub with Australian Spa Parts
Before you drain your hot tub, for safety reasons, turn off its power first. Then connect a garden hose to your hot tub’s drain outlet. Once the line is firmly connected, place the other end of the garden hose at the preferred destination and open the drain valve to begin the draining process.
An important note here.
There are some city-states where you are not allowed to drain your hot tub or swimming pool water into the street. Verify first if this is the case in your locale, otherwise, find an alternative draining option for your swim spa.
Thankfully, low levels of bromine or chlorine are not known to hurt grass in lawn spaces or do not harm vegetation.
If you’re concerned if drain water from your pool equipment can harm your lawn grass, simply test the water first before draining to confirm that your pool water bromine levels are less than 10ppm. If you are using chlorine, typically it should be 5ppm or below.
After emptying your hot tub, obtain a shop vac to clear away the remaining water. Furthermore, you can attach the shop vac hose to the suctions and jets to remove some of the water from the pipework.
Once all visible water has been withdrawn from the hot tub (no need to worry about the small amount that remains in the plumbing, you won’t be able to remove them anyway). Spray the hot tub shell with a commercial-grade, non-sudsing hot tub cleaner, and then wipe it clean with a cotton cloth. An ordinary paper towel will take care of it, too.
Adding Water To The Hot Tub
After cleaning the surface of the hot tub, shut the drain valve and disengage the garden hose. After that, you can start refilling the hot tub with fresh, clean water. It is crucial to replenish your pool equipment with water from the filtration area. This lets the pump initially fill with water first and at the same time takes away the possibility of an airlock the next time that you make use of the hot tub again.
The moment your hot tub is filled with water, you can turn up the power and allow the hot tub to begin to heat up. Its temperature should reach around 70 degrees Fahrenheit. With this temperature level, you can start adding your initial pool water chemicals but in moderation only. See to it that you have them in proper balance. For your guide, always consult the user manual for this.
Every 3 to 4 months, based on the frequency of use of your hot tub with Australian spa parts, make sure you drain its water and refill it to ensure that the water you are using remains clean, fresh, and of good quality.